--- description: MetalLB - Load-balancing for bare-metal Kubernetes clusters --- # MetalLB [MetalLB](https://metallb.universe.tf/) offers a network [load balancer](/kubernetes/loadbalancer/) implementation which workes on "bare metal" (*as opposed to a cloud provider*). MetalLB does two jobs: 1. Provides address allocation to services out of a pool of addresses which you define 2. Announces these addresses to devices outside the cluster, either using ARP/NDP (L2) or BGP (L3) !!! summary "Ingredients" * [x] A [Kubernetes cluster](/kubernetes/cluster/) * [x] [Flux deployment process](/kubernetes/deployment/flux/) bootstrapped * [x] If k3s is used, then it was deployed with `--disable servicelb` Optional: * [ ] Network firewall/router supporting BGP (*ideal but not required*) ## Preparation ### Allocations You'll need to make some decisions re IP allocations. * What is the range of addresses you want to use for your LoadBalancer service pool? If you're using BGP, this can be a dedicated subnet (*i.e. a /24*), and if you're not, this should be a range of IPs in your existing network space for your cluster nodes (*i.e., 192.168.1.100-200*) * If you're using BGP, pick two [private AS numbers](https://datatracker.ietf.org/doc/html/rfc6996#section-5) between 64512 and 65534 inclusively. ### Namespace We need a namespace to deploy our HelmRelease and associated ConfigMaps into. Per the [flux design](/kubernetes/deployment/flux/), I create this in my flux repo at `bootstrap/namespaces/namespace-metallb-system.yaml`: ??? example "Example NameSpace (click to expand)" ```yaml apiVersion: v1 kind: Namespace metadata: name: metallb-system ``` ### HelmRepository Next, we need to define a HelmRepository (*a repository of helm charts*), to which we'll refer when we create the HelmRelease. We only need to do this once per-repository. In this case, we're using the (*prolific*) [bitnami chart repository](https://github.com/bitnami/charts/tree/master/bitnami), so per the [flux design](/kubernetes/deployment/flux/), I create this in my flux repo at `bootstrap/helmrepositories/helmrepository-bitnami.yaml`: ??? example "Example HelmRepository (click to expand)" ```yaml apiVersion: source.toolkit.fluxcd.io/v1beta1 kind: HelmRepository metadata: name: bitnami namespace: flux-system spec: interval: 15m url: https://charts.bitnami.com/bitnami ``` ### Kustomization Now that the "global" elements of this deployment (*Namespace and HelmRepository*) have been defined, we do some "flux-ception", and go one layer deeper, adding another Kustomization, telling flux to deploy any YAMLs found in the repo at `/metallb-system`. I create this Kustomization in my flux repo at `bootstrap/kustomizations/kustomization-metallb.yaml`: ??? example "Example Kustomization (click to expand)" ```yaml apiVersion: kustomize.toolkit.fluxcd.io/v1beta1 kind: Kustomization metadata: name: metallb--metallb-system namespace: flux-system spec: interval: 15m path: ./metallb-system prune: true # remove any elements later removed from the above path timeout: 2m # if not set, this defaults to interval duration, which is 1h sourceRef: kind: GitRepository name: flux-system validation: server healthChecks: - apiVersion: apps/v1 kind: Deployment name: metallb-controller namespace: metallb-system ``` !!! question "What's with that screwy name?" > Why'd you call the kustomization `metallb--metallb-system`? I keep my file and object names as consistent as possible. In most cases, the helm chart is named the same as the namespace, but in some cases, by upstream chart or historical convention, the namespace is different to the chart name. MetalLB is one of these - the helmrelease/chart name is `metallb`, but the typical namespace it's deployed in is `metallb-system`. (*Appending `-system` seems to be a convention used in some cases for applications which support the entire cluster*). To avoid confusion when I list all kustomizations with `kubectl get kustomization -A`, I give these oddballs a name which identifies both the helmrelease and the namespace. ### ConfigMap (for HelmRelease) Now we're into the metallb-specific YAMLs. First, we create a ConfigMap, containing the entire contents of the helm chart's [values.yaml](https://github.com/bitnami/charts/blob/master/bitnami/metallb/values.yaml). Paste the values into a `values.yaml` key as illustrated below, indented 4 tabs (*since they're "encapsulated" within the ConfigMap YAML*). I create this in my flux repo at `metallb-system/configmap-metallb-helm-chart-value-overrides.yaml`: ??? example "Example ConfigMap (click to expand)" ```yaml apiVersion: v1 kind: ConfigMap metadata: creationTimestamp: null name: metallb-helm-chart-value-overrides namespace: metallb-system data: values.yaml: |- ## @section Global parameters ## Global Docker image parameters ## Please, note that this will override the image parameters, including dependencies, configured to use the global value ## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass ## @param global.imageRegistry Global Docker image registry ## @param global.imagePullSecrets Global Docker registry secret names as an array ## global: imageRegistry: "" ## E.g. ## imagePullSecrets: ## - myRegistryKeySecretName prometheus: ## Prometheus Operator service monitors ## serviceMonitor: ## @param speaker.prometheus.serviceMonitor.enabled Enable support for Prometheus Operator ## enabled: false ## @param speaker.prometheus.serviceMonitor.jobLabel Job label for scrape target ## jobLabel: "app.kubernetes.io/name" ## @param speaker.prometheus.serviceMonitor.interval Scrape interval. If not set, the Prometheus default scrape interval is used ## interval: "" ## @param speaker.prometheus.serviceMonitor.metricRelabelings Specify additional relabeling of metrics ## metricRelabelings: [] ## @param speaker.prometheus.serviceMonitor.relabelings Specify general relabeling ## relabelings: [] ``` --8<-- "kubernetes-why-full-values-in-configmap.md" Then work your way through the values you pasted, and change any which are specific to your configuration. I'd recommend changing the following: * `existingConfigMap: metallb-config`: I prefer to set my MetalLB config independently of the chart config, so I set this to `metallb-config`, which I then define below. * `commonAnnotations`: Anticipating the future use of Reloader to bounce applications when their config changes, I add the `configmap.reloader.stakater.com/reload: "metallb-config"` annotation to all deployed objects, which will instruct Reloader to bounce the daemonset if the ConfigMap changes. ### ConfigMap (for MetalLB) Finally, it's time to actually configure MetalLB! As discussed above, I prefer to configure the helm chart to apply config from an existing ConfigMap, so that I isolate my application configuration from my chart configuration (*and make tracking changes easier*). In my setup, I'm using BGP against a pair of pfsense[^1] firewalls, so per the [official docs](https://metallb.universe.tf/configuration/), I use the following configuration, saved in my flux repo as `metallb-system/configmap-metallb-config.yaml`: ??? example "Example ConfigMap (click to expand)" ```yaml apiVersion: v1 kind: ConfigMap metadata: namespace: metallb-system name: metallb-config data: config: | peers: - peer-address: 192.168.33.2 peer-asn: 64501 my-asn: 64500 - peer-address: 192.168.33.4 peer-asn: 64501 my-asn: 64500 address-pools: - name: default protocol: bgp avoid-buggy-ips: true addresses: - 192.168.32.0/24 ``` !!! question "What does that mean?" In the config referenced above, I define one pool of addresses (`192.168.32.0/24`) which MetalLB is responsible for allocating to my services. MetalLB will then "advertise" these addresses to my firewalls (`192.168.33.2` and `192.168.33.4`), in an eBGP relationship where the firewalls' ASN is `64501` and MetalLB's ASN is `64500`. Provided I'm using my firewalls as my default gateway (*a VIP*), when I try to access one of the `192.168.32.x` IPs from any subnet connected to my firewalls, the traffic will be routed from the firewall to one of the cluster nodes running the pods selected by that service. !!! note "Dude, that's too complicated!" There's an easier way, with some limitations. If you configure MetalLB in L2 mode, all you need to do is to define a range of IPs within your existing node subnet, like this: ```yaml apiVersion: v1 kind: ConfigMap metadata: namespace: metallb-system name: metallb-config data: config: | address-pools: - name: default protocol: layer2 addresses: - 192.168.1.240-192.168.1.250 ``` ### HelmRelease Lastly, having set the scene above, we define the HelmRelease which will actually deploy MetalLB into the cluster, with the config and extra ConfigMap we defined above. I save this in my flux repo as `metallb-system/helmrelease-metallb.yaml`: ??? example "Example HelmRelease (click to expand)" ```yaml apiVersion: helm.toolkit.fluxcd.io/v2beta1 kind: HelmRelease metadata: name: metallb namespace: metallb-system spec: chart: spec: chart: metallb version: 2.x sourceRef: kind: HelmRepository name: bitnami namespace: flux-system interval: 15m timeout: 5m releaseName: metallb valuesFrom: - kind: ConfigMap name: metallb-helm-chart-value-overrides valuesKey: values.yaml # This is the default, but best to be explicit for clarity ``` --8<-- "kubernetes-why-not-config-in-helmrelease.md" ## Deploy MetalLB Having committed the above to your flux repository, you should shortly see a metallb kustomization, and in the `metallb-system` namespace, a controller and a speaker pod for every node: ```bash root@cn1:~# kubectl get pods -n metallb-system -o wide NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES metallb-controller-779d8686f6-mgb4s 1/1 Running 0 21d 10.0.6.19 wn3 metallb-speaker-2qh2d 1/1 Running 0 21d 192.168.33.24 wn4 metallb-speaker-7rz24 1/1 Running 0 21d 192.168.33.22 wn2 metallb-speaker-gbm5r 1/1 Running 0 21d 192.168.33.23 wn3 metallb-speaker-gzgd2 1/1 Running 0 21d 192.168.33.21 wn1 metallb-speaker-nz6kd 1/1 Running 0 21d 192.168.33.25 wn5 root@cn1:~# ``` !!! question "Why are there no speakers on my masters?" In some cluster setups, master nodes are "tainted" to prevent workloads running on them and consuming capacity required for "mastering". If this is the case for you, but you actually **do** want to run some externally-exposed workloads on your masters, you'll need to update the `speaker.tolerations` value for the HelmRelease config to include: ```yaml - key: "node-role.kubernetes.io/master" effect: "NoSchedule" ``` ### How do I know it's working? If you used my [template repository](https://github.com/geek-cookbook/template-flux) to start off your [flux deployment strategy](/kubernetes/deployment/flux/), then the podinfo helm chart has already been deployed. By default, the podinfo service is in `ClusterIP` mode, so it's only reachable within the cluster. Edit your podinfo helmrelease configmap (`/podinfo/configmap-podinfo-helm-chart-value-overrides.yaml`), and change this: ``` yaml hl_lines="6" # Kubernetes Service settings service: enabled: true annotations: {} type: ClusterIP ``` To: ``` yaml hl_lines="6" # Kubernetes Service settings service: enabled: true annotations: {} type: LoadBalancer ``` Commit your changes, wait for a reconciliation, and run `kubectl get services -n podinfo`. All going well, you should see that the service now has an IP assigned from the pool you chose for MetalLB! --8<-- "recipe-footer.md" [^1]: I've documented an example re [how to configure BGP between MetalLB and pfsense](/kubernetes/loadbalancer/metallb/pfsense/).