From 1114171110062266f11100eb34135755cfdd6807 Mon Sep 17 00:00:00 2001 From: Devon Jones Date: Tue, 19 Sep 2017 12:11:55 -0600 Subject: [PATCH] Update README.md --- sets/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sets/README.md b/sets/README.md index d200432..774f87d 100644 --- a/sets/README.md +++ b/sets/README.md @@ -61,10 +61,10 @@ Here's a cheap set from [amazon](https://www.amazon.com/Xuron-410-Micro-Shear-Fl I use a standard bic lighter. Best way to get rid of stringing if you have any. Also super useful for making rivets out of filament. #### Spray Paint Booth -Because I'm making a ton of tiles, I built a simple spray paint booth. What I did was go get some flat cardboard (from say an amazon box), and a plastic crate (like [this one](https://www.lowes.com/pd/Style-Selections-Bella-30-Gallon-Clear-Tote-with-Standard-Snap-Lid/50149128)). Got rid of the lid, added the cardboard on the bottom, and bam, instant spray booth. +Because I'm making a ton of tiles, I built a simple spray paint booth. What I did was go get some flat cardboard (from say an amazon box), and a plastic crate (like [this one](https://www.lowes.com/pd/Style-Selections-Bella-30-Gallon-Clear-Tote-with-Standard-Snap-Lid/50149128)). Get rid of the lid, add the cardboard on the bottom, and bam, instant spray booth. #### Drill Press -Printing isn't always clean. In many cases, magnet holes will end up with stringing, gunk or other bits of plastic in them. I use a benchtop drill press with a 15/64" or 6mm drill bit. This is not strictly necessary, it's totally aa nice to have. You don't need anything nice, you can just the cheap-o model from [Harbor Freight](https://www.harborfreight.com/8-in-5-speed-bench-drill-press-60238.html). I find a ton of use for my drill press, unrelated to OpenForge. If you have the space, I recommend one. +Printing isn't always clean. In many cases, magnet holes will end up with stringing, gunk or other bits of plastic in them. I use a benchtop drill press with a 15/64" or 6mm drill bit. This is not strictly necessary, it's totally aa nice to have. You don't need anything nice, you can just the cheap-o model from [Harbor Freight](https://www.harborfreight.com/8-in-5-speed-bench-drill-press-60238.html). I find a ton of use for my drill press, unrelated to OpenForge. If you have the space, I recommend one. If not, you can still do this with any drill, it's just easier with a drill press. ## Basic Set