diff --git a/sets/README.md b/sets/README.md
index fa8e22c..7a7ae1f 100644
--- a/sets/README.md
+++ b/sets/README.md
@@ -68,9 +68,11 @@ Printing isn't always clean.  In many cases, magnet holes will end up with strin
 
 ## Sets
 
+* [Ultra Basic Set](ultra_basic.md)
 * [Basic Set](basic.md) <- Start here
 * [Diagonal Set](diagonal.md)
 * [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
 <!--
 * [Hallway Set](hallway.md)
 * [Options](options.md)
diff --git a/sets/basic.md b/sets/basic.md
index 4d2d7f2..07182a8 100644
--- a/sets/basic.md
+++ b/sets/basic.md
@@ -125,9 +125,11 @@ Ruined stone is a varation of rough stone, where the pieces are not entirely com
 
 [Instructions](README.md)
 
+* [Ultra Basic Set](ultra_basic.md)
 * [Basic Set](basic.md) <- Start here
 * [Diagonal Set](diagonal.md)
 * [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
 <!--
 * [Hallway Set](hallway.md)
 * [Options](options.md)
diff --git a/sets/curved.md b/sets/curved.md
index 83f002e..1e1f38b 100644
--- a/sets/curved.md
+++ b/sets/curved.md
@@ -57,9 +57,11 @@ Ruined stone is a varation of rough stone, where the walls are broken.  If you p
 
 [Instructions](README.md)
 
+* [Ultra Basic Set](ultra_basic.md)
 * [Basic Set](basic.md) <- Start here
 * [Diagonal Set](diagonal.md)
 * [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
 <!--
 * [Hallway Set](hallway.md)
 * [Options](options.md)
diff --git a/sets/diagonal.md b/sets/diagonal.md
index 416e33c..763b5dd 100644
--- a/sets/diagonal.md
+++ b/sets/diagonal.md
@@ -35,9 +35,11 @@
 
 [Instructions](README.md)
 
+* [Ultra Basic Set](ultra_basic.md)
 * [Basic Set](basic.md) <- Start here
 * [Diagonal Set](diagonal.md)
 * [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
 <!--
 * [Hallway Set](hallway.md)
 * [Options](options.md)
diff --git a/sets/hallway.md b/sets/hallway.md
index 8796bf0..c44bd34 100644
--- a/sets/hallway.md
+++ b/sets/hallway.md
@@ -13,9 +13,11 @@
 
 [Instructions](README.md)
 
+* [Ultra Basic Set](ultra_basic.md)
 * [Basic Set](basic.md) <- Start here
 * [Diagonal Set](diagonal.md)
 * [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
 <!--
 * [Hallway Set](hallway.md)
 * [Options](options.md)
diff --git a/sets/openlock.md b/sets/openlock.md
new file mode 100644
index 0000000..04d54ab
--- /dev/null
+++ b/sets/openlock.md
@@ -0,0 +1,100 @@
+# OpenLOCK Set
+
+To create a basic OpenLOCK set, you will want a selection that lets you build a few small rooms, or a larger, more complex room. To that end, we suggest you start off with the following:
+
+Requires 1-2 1 kg rolls of filament.  If you want to make the tiles magnetic, it will also reqire 364 Magnets and some cyanoacrylate glue (superglue).
+
+* 20 E floors (2x2)
+* 8 F floors (2x2, curved)
+* 4 U floors (4x4)
+* 20 A walls
+* 4 BA walls <- Strongly suggest you do this one in triplex even if doing magnetic for everything else
+* 8 G walls
+* 2 IA <- Suggest you do this one in triplex too
+* 4 Q walls
+* 4 A doors
+* 2 Q doors
+* 2 A windows
+
+If doing low walls, print these columns:
+
+* 4 I low columns
+* 8 O low columns
+
+If doing normal height walls, print these columns:
+
+* 4 I columns
+* 8 L columns (used for corners)
+* 4 O columns
+* 4 X columns
+* 4 T columns
+
+When picking what you want to print, you are going to first want to decide if you are going to glue pieces or not. If you don't want to glue anything, select the files named [set]_wall.inch.[letter].low.triplex.?. If you want magnets, then select [set]_wall.inch.[letter].low.openforge.?. It is *not* critical that every wall be the same.  The rules for floors are similar.  Triplex tiles print as one piece, openforge tiles print as two, and require a glued base.
+
+If you are using the openforge varients, you will also need to print a base: [set]_base.inch.[letter].openlock.magnetic.?.
+
+Second you will want to decide if you want sidelocking. Odds are you do. For that, select files with .side. in the name.
+
+Finally you will want to choose if you want pegs. Pegs are used for indexing a second floor. If you never plan on building multi floor layouts, skip them. Even if you do, you may not want them on all tiles, as they can interfere with the aesthetics a little. We print them on about half of our A walls, which gives enough to index an upper layer if you want.
+
+## Cut-Stone
+There is not currently a 7.2 openlock set, but there is a 6.0 openlock set, as well as a 4.3 set, that has a subset of what we want.  A full 7.2 port is forthcoming.
+
+* [Walls and Floors](https://www.thingiverse.com/thing:2523618) A, BA, E, columns
+* [Floors](https://www.thingiverse.com/thing:1882293) U, many secondary floors.  No triplex.  No openforge.
+* [Walls](https://www.thingiverse.com/thing:1882294) A, BA, IA, Q, many secondary walls.  No triplex.  No openforge.
+* [Curved Walls](https://www.thingiverse.com/thing:2034428) G, many secondary walls.  No openforge.
+* [Curved Floors](https://www.thingiverse.com/thing:2034427) F, many secondary floors.  No triplex. No openforge.
+* [Doors](https://www.thingiverse.com/thing:2209955) A, Q and many other secondary walls.  No triplex.  No openforge.
+* Windows (not yet published)
+
+## Cut-Stone Half-Height
+There is not currently a 7.2 openlock set, but there is a 6.0 openlock set, as well as a 4.3 set, that has a subset of what we want.  A full 7.2 port is forthcoming.
+
+* [Walls and Floors](https://www.thingiverse.com/thing:2523618) Includes half height A, BA, E, columns.
+* [Floors](https://www.thingiverse.com/thing:1882293) U, many secondary floors.  No triplex.  No openforge.
+* [Walls](https://www.thingiverse.com/thing:2007667), A, BA, IA, Q, many secondary walls.  No triplex.  No openforge.
+* [Curved Walls](https://www.thingiverse.com/thing:2034429) G, many secondary walls.  No openforge.
+* [Curved Floors](https://www.thingiverse.com/thing:2034427) F, many secondary floors.  No triplex. No openforge.
+* [Doors](https://www.thingiverse.com/thing:2209955) A, Q and many other secondary walls.  No triplex.  No openforge.  Doors are full height.
+* Windows (not yet published)
+
+## Dungeon Stone
+
+* [Primary Walls](https://www.thingiverse.com/thing:2787903) (A, BA, G, IA, Q, columns)
+* [Floors](https://www.thingiverse.com/thing:2787905) (E, F, U)
+* Doors (not yet published)
+* Windows (not yet published)
+
+## Dungeon Stone Half-Height
+
+* [Low Primary Walls](https://www.thingiverse.com/thing:2787904) (A, BA, G, IA, Q, columns)
+* [Floors](https://www.thingiverse.com/thing:2787905) (E, F, U)
+* Doors (not yet published)
+* Windows (not yet published)
+
+## Rough/Ruined Stone
+There is not currently a 7.2 openlock set, but there is a 6.0 openlock set, that has a subset of what we want.  A full 7.2 port is forthcoming.
+* [Sidelock Walls](https://www.thingiverse.com/thing:2353958) A, columns, multiple heights and states of ruin.  No triplex. No openforge.
+* [Walls](https://www.thingiverse.com/thing:2388597) A, BA, Q, multiple heights and many secondary walls.  No triplex. No openforge.
+* [Shattered floors](https://www.thingiverse.com/thing:2374136) E in various broken forms, needs to be resized by 101.6% as they are in 25mm.  No single piece options, all require use of a base.
+* [Floors](https://www.thingiverse.com/thing:2244962) E, U and every other floor size from 1x1 - 4x4. Needs to be resized by 101.6% as they are in 25mm.  No single piece options, all require use of a base.
+* Doors (not yet published)
+* Windows (not yet published)
+
+## Tudor
+Tudor set is not yet published, though [start2](https://www.thingiverse.com/Start2/designs/page:1) has published a number of tudor ports for me.
+
+# Navigation
+
+[Instructions](README.md)
+
+* [Ultra Basic Set](ultra_basic.md)
+* [Basic Set](basic.md) <- Start here
+* [Diagonal Set](diagonal.md)
+* [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
+<!--
+* [Hallway Set](hallway.md)
+* [Options](options.md)
+-->
diff --git a/sets/options.md b/sets/options.md
index ba61649..ab0ad40 100644
--- a/sets/options.md
+++ b/sets/options.md
@@ -12,9 +12,11 @@
 
 [Instructions](README.md)
 
+* [Ultra Basic Set](ultra_basic.md)
 * [Basic Set](basic.md) <- Start here
 * [Diagonal Set](diagonal.md)
 * [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
 <!--
 * [Hallway Set](hallway.md)
 * [Options](options.md)
diff --git a/sets/ultra_basic.md b/sets/ultra_basic.md
new file mode 100644
index 0000000..19afaee
--- /dev/null
+++ b/sets/ultra_basic.md
@@ -0,0 +1,63 @@
+# Basic Set
+
+Some GMs may not want the complexity of walls.  For this set, the assumption is that what you want is to have floors only, with walls only used for special things like doors and windows.  This set, like the other basic set gives you a selection that lets you build a few small rooms, or a larger, more complex room. To that end, we suggest you start off with the following:
+
+Requires 1-2 1 kg rolls of filament and 376 Magnets.  You will also need some cyanoacrylate glue (superglue).
+
+* 20 2x2 floors
+* 4 2x4 floors
+* 6 4x4 floors
+* 4 2x2 doors
+* 2 4x2 wide doors
+* 2 2x2 windows
+
+For flexibility, and to maximize the chances of producing usable parts we suggest using construction kit versions of tiles wherever possible.
+
+## Cut-Stone
+
+* Walls
+* [Floors](https://www.thingiverse.com/thing:1422779)
+* Doors
+  * [Arched Doors](https://www.thingiverse.com/thing:1440089) or [Wood Frame Doors](https://www.thingiverse.com/thing:1722459) (consider doing a full set of both)
+  * [Wall Floors](https://www.thingiverse.com/thing:1640988) & [Wall Backs](https://www.thingiverse.com/thing:1641002) as a construction kit.  Wall backs contains every variety of cut-stone backs for the construction kit.
+  * (arched) cut_stone_door.2xW.internal.standard.ckit
+  * (wood frame) cut_stone_door_square.stone_floor.2xW.internal.standard.ckit + door_lintel_1, 2 or 3
+  * cut_stone_floor.2x2.internal.ckit
+  * 2x2 square base in the connector style you prefer
+* [Arched Windows](https://www.thingiverse.com/thing:1541301) or [Square Windows](https://www.thingiverse.com/thing:1674376) (consider doing a full set of both)
+
+## Tudor
+
+* [Floors](https://www.thingiverse.com/thing:1585586)
+* [Wood Frame Doors](https://www.thingiverse.com/thing:1649422), [Wood Frame Door Variations Set 1](https://www.thingiverse.com/thing:1649437)
+* [Square Windows](https://www.thingiverse.com/thing:1659308)
+
+## Rough Stone
+
+* [Floors](https://www.thingiverse.com/thing:2244962)
+  * spread your prints out of the 2x2 between all of 2x2.a - 2x2.i
+* [Wood Framed Doors](https://www.thingiverse.com/thing:2423018)
+  * ruined_door_square.ckit.2x.full-full
+  * ruined_floor.door.ckit.2x2.stl
+  * door_lintel_1, 2 or 3
+  * tudor_square_door
+  * ruined_door_square.ckit.4x.full-fullx
+  * ruined_floor.door.ckit.4x2.stl
+  * door_lintel_1.double, 2 or 3
+  * tudor_square_door_double
+* [Square Windows](https://www.thingiverse.com/thing:2503963)
+  * ruined_wall.window.ckit.2x.full
+
+# Navigation
+
+[Instructions](README.md)
+
+* [Ultra Basic Set](ultra_basic.md)
+* [Basic Set](basic.md) <- Start here
+* [Diagonal Set](diagonal.md)
+* [Curved Set](curved.md)
+* [OpenLOCK Set](openlock.md)
+<!--
+* [Hallway Set](hallway.md)
+* [Options](options.md)
+-->