11 KiB
OpenForge Sets
Introduction
We think in general it's a good idea to have one set that you have a ton of tiles for, with lots of flexibility, and then a bunch of smaller sets where you can build a few rooms with some differing flair. It seems counterintuitive, but cut-stone is designed to actually be a little boring, which makes it a perfect set for the large set. It's easy to add flair to the dungeon with a few interesting tiles, or scatter terrain, but your basic set will serve you better if it is more of a plain pallet you can use to build a bunch of different things. The more distinctive it is, the harder it is to use for different game situations. Once you have selected the base set you intend to use, then you can extend it with various tiles, and other, smaller sets to add visual interest, or to make particular areas of your map vary for game reasons.
There is no need to stick to OpenForge for all your tiles. The bases we produce can work with basically any other project's tiles. You just need to cut off 6mm from the base of any other tile system, something that most slicers can do, but can also easily be done in blender with a cube and a boolean difference. Select a connection system, and go with that universally. We love doing openlock + magnetic. Magnets make life way easier when you are quickly building a map at the table. Openlock makes it much easier to build rooms ahead of time that you don't have to worry about getting knocked apart. The combination is great. You'll also want to choose a square size, which is a bit more complicated. OpenForge internal tiles and dwarven forge are based on 25mm squares. Printable Scenery, Dragonlock and Hirstarts are based on 1" squares. To make the 25mm tiles the 1" scale, scale them up to 101.6%. To do the reverse, scale 1" tiles down to 98.4%. however, the OpenForge bases are already the right size. DO NOT SCALE THEM, as it will break the openlock connectors. We have not started altering the file names, but in the future, the file names will contain the square basis so that it's super easy from the outset to understand what scale things are in.
All of our set suggestions below are based on the preference for Magnets + OpenLOCK. You can always swap in what base you prefer. Some people prefer to use our plain bases that have no texture on them so that all the tiles line up perfectly. Some people prefer the bases to carry the texture of the tile all the way through. The bases have a broad variety including magnet, openlock, magnetic + openlock, openlock triplex, plain, and any other base you want to imagine.
Basic Set
To create a basic set, you will want a selection that lets you build a few small rooms, or a larger, more complex room. To that end, we suggest you start off with the following:
376 Magnets
- 14 2x2 walls
- 8 2x2 corners
- 12 2x2 floors
- 2 4x4 floors
- 4 2x2 doors
- 2 4x2 wide doors
- 2 2x2 windows
Cut-Stone
376 Magnets
- Walls, Wall Floors, Wall Backs
- Corners, Corner Floors, Corner Backs
- Floors
- Arched Doors or Wood Frame Doors (consider doing a full set of both)
- Arched Windows or Square Windows (consider doing a full set of both)
Cut-Stone Half-Height
Windows and Doors don't make much sense at half-height. If your goal is to create a set that lets you easily see the miniatures, we suggest printing the half-height set and then printing full height doors and windows above.
Tudor
376 Magnets
- Walls, Wall Variations Set 1, Wall Variations Set 2, Wall Construction Kit Parts, Wall Construction Kit Floors
- Corners, Corner Variations Set 1 Corner Construction Kit Parts, Corner Construction Kit Floors
- Floors
- Wood Frame Doors, Wood Frame Door Variations Set 1
- Square Windows
Rough Stone
Rough stone is a varation of ruined stone, where the pieces are complete. If you print rough stone, we suggest also printing the full range of ruined variations, as the two work really well together to make partially intact buildings or rooms.
400 Magnets
- Walls
- 14 of ruined_wall.wall.ckit.2x.full.stl
- If you want half-height, instead ruined_wall.wall.ckit.2x.half.stl
- 2 each of broken_stone_floor.wall.ckit.2x2.a - broken_stone_floor.wall.ckit.2x2.i
- Corners
- 8 ruined_wall.corner.ckit.2x.full.stl or 8 of ruined_wall.corner.ckit.2x.half.stl if you want half height
- 8 of broken_stone_floor.corner.ckit.2x2.a - broken_stone_floor.corner.ckit.2x2.i
- Floors
- 2x each of 2x2.a - 2x2.i (18 total, but gives a lot of variation)
- 2x of 4x4
- Wood Framed Doors
- 4x of ruined_door_square.ckit.2x.full-full
- 4x of ruined_floor.door.ckit.2x2.stl
- 4x of door_lintel_1, 2 or 3
- 4x of tudor_square_door
- 2x of ruined_door_square.ckit.4x.full-fullx
- 2x of ruined_floor.door.ckit.4x2.stl
- 2x of door_lintel_1.double, 2 or 3
- 4x of tudor_square_door_double
- Square Windows
- 2x ruined_wall.window.ckit.2x.full
- Use 2 of the floors printed for the walls that were left over
Ruined Stone
Ruined stone is a varation of rough stone, where the pieces are not entirely complete. If you print rough stone, we suggest also printing the full range of ruined variations, as the two work really well together to make partially intact buildings or rooms.
532 Magnets
- Walls
- 2x ruined_wall.wall.ckit.2x.full-half.stl
- 2x ruined_wall.wall.ckit.2x.full-low.stl
- 2x ruined_wall.wall.ckit.2x.half-full.stl
- 2x ruined_wall.wall.ckit.2x.half.stl
- 2x ruined_wall.wall.ckit.2x.half-low.stl
- 2x ruined_wall.wall.ckit.2x.low-full.stl
- 2x ruined_wall.wall.ckit.2x.low-half.stl
- 2x ruined_wall.wall.ckit.2x.low.stl
- 2x each of broken_stone_floor.wall.ckit.2x2.a - broken_stone_floor.wall.ckit.2x2.i
- Corners
- There are 27 variations of corner height, pick 8 that are uneven
- 8 of broken_stone_floor.corner.ckit.2x2.a - broken_stone_floor.corner.ckit.2x2.i
- Floors
- 2x each of 2x2.a - 2x2.i (18 total, but gives a lot of variation)
- 2x of 4x4
- Wood Framed Doors
- 4x of ruined_door_square.ckit.2x.full-half, full-low, half-full, half-half, half-low, low-full, low-half, low-low
- 4x of ruined_floor.door.ckit.2x2.stl
- 2x of ruined_door_square.ckit.4x.full-half, full-low, half-full, half-half, half-low, low-full, low-half, low-low
- 2x of ruined_floor.door.ckit.4x2.stl
- Square Windows
- Any 2 of ruined_wall.window.ckit.2x.full-half, half and half-full
- Use 2 of the floors printed for the walls that were left over
- Shattered Floors
- 2x shattered_stone_floor.2x2.side.a 6
- 2x shattered_stone_floor.2x2.side.a.mirrored 6
- 2x shattered_stone_floor.2x2.side.b 6
- 2x shattered_stone_floor.2x2.side.b.mirrored 6
- 2x shattered_stone_floor.2x2.corner.convex 4
- 2x shattered_stone_floor.2x2.corner.convex.mirrored 4
- 2x shattered_stone_floor.2x2.corner.concave 6
- 2x shattered_stone_floor.2x2.corner.concave.mirrored 6
Diagonal Set
- 8 2x2 Diagonals (Diagonal floor)
- 8 2x2 Diagonals (Square floor)
Cut-Stone
Cut-Stone Half-Height
- Diagonal (Not our tile, but works)
- Diagonal Square Bases (Also not our tiles, but they work)
Tudor
Rough Stone
- Diagonal
- Suggested prints
- 16x ruined_wall.diagonal.ckit.2x2.full
- 24x ruined_diagonal.floor.2x2 (square diagonal tiles use 2)
Ruined Stone
- Diagonal
- Suggested prints
- 16x, 2 each of ruined_wall.diagonal.ckit.2x2.full-half, full-low, half-full, half, half-low, low-full, low-half, low
- 24x ruined_diagonal.floor.2x2 (square diagonal tiles use 2)
Curved Set
- 8 2x2 Curved (Curved floor)
- 8 2x2 Curved (Square floor)
- 4 4x4 Curved (Curved floor)
- 2 2x4 Curved (Curved floor)
- 2 4x2 Curved (Curved floor)
Cut-Stone
Cut-Stone Half-Height
- 2x2 Curved Square (Not our tiles, but they work)
- 2x2, 2x4, 4x2, 4x4 Curved Half-Height - No known implementation
If you are interested in the missing tiles happening, Patrons can vote on new tiles.
Tudor
We've been unable to find examples of curved walls in a Tudor style, so we've never implemented sets for this. If you are interested in these happening, Patrons can vote on new tiles.
Rough Stone
Ruined Stone
Hallway Set
- 16 A OpenLOCK Walls, sidelock + magnetic + OpenLOCK bases
- 8 BA OpenLOCK Walls, sidelock + OpenLOCK Triplex bases
- 16 L OpenLOCK Columns, sidelock
Cut-Stone
Tudor
Rough Stone
Ruined Stone
Options
- 4 2x2 Arrow Slits
- 2 2x2 Grate
- 1 2x4 Grate
- 1 4x4 Grate
- 1 2x2 Trap Door
- 1 2x2 Corner Trap Door
- Mosaic Floors