adding morehead mausoleum painting guide

painting/morehead_mausoleum/README.md

@@ -0,0 +1,130 @@
+## Supplies
+
+### 3d printed parts
+* Dome
+* Entrance 1 (4x) (print with the top face down for best results
+* Entrance 2 (4x)
+* Entrance 3 (8x)
+* Mausoleum Wall (4x)
+* 4 doors or windows, any mix you prefer
+
+### Paint
+* [Brown Krylon Fusion Primer](http://amzn.to/2Et5nEm) Ultra Flat Camoflage
+* Burnt Sienna (Americana)
+* Americana [Raw Sienna](http://amzn.to/2EfKJIz)
+* Americana [Honey Brown](http://amzn.to/2BmMi4O)
+* Fawn (Americana) (Couldn't find a good price, go to a craft store)
+* Desert Sand (Americana) (Couldn't finde a good price, go to a craft store)
+* Sepia Wash ([Vallejo Game Color Wash Set](http://amzn.to/2F2xOGW)) or [Citadel Seraphim Sepia](https://www.miniaturemarket.com/gw-24-09.html)
+* Umber Wash ([Vallejo Game Color Wash Set](http://amzn.to/2F2xOGW)) or [Citadel Agrax Earthshade](https://www.miniaturemarket.com/gw-24-15.html)
+* Black Wash ([Vallejo Game Color Wash Set](http://amzn.to/2F2xOGW)) or [Citadel Nuln Oil](https://www.miniaturemarket.com/gw-24-12.html)
+* Adamantine Black 09124 ([Reaper Master Series](https://www.reapermini.com/Paints/corecolors))
+* Old Pewter 09196 ([Reaper Master Series](https://www.reapermini.com/Paints/corecolors))
+* Old Bronze 09197 ([Reaper Master Series](https://www.reapermini.com/Paints/corecolors))
+* Spruce Green 29846 ([Reaper Master Series HD](https://www.reapermini.com/Paints/corecolors))
+* Sapphire Blue 09016 ([Reaper Master Series](https://www.reapermini.com/Paints/corecolors))
+* [Liquitex Matte Medium](http://amzn.to/2CiHOZq)
+* Water
+
+
+
+### Other Supplies
+* 1.75 mm filament, 8 short lengths about 3/4"
+* Cyanoacrylate glue (super glue) such as [Gorilla Super Glue Gel](http://amzn.to/2H58rEX)
+* [Pin Vice](http://amzn.to/2BklUbt) (Optional)
+
+Here's a [reasonably cheap one](http://amzn.to/2BjyIPu) and one that has a .  A variety of bits is really worth it.  In fact, I really did actually order the second one from amazon while writing this.  Seriously.
+## Painting
+
+[Prime](2017-04-12_08.18.17.jpg)
+* Prime the pieces with dark brown primer. I love the Krylon Fusion paints, they are super flat and bind to plastic really well.
+
+[Burnt Sienna](2017-04-12_08.44.28.jpg)
+* Hit the stone areas with medium coverage of Burnt Sienna. You want to make sure the deep areas still show through with the dark brown.
+
+[Raw Sienna](2017-04-12_09.04.49.jpg)
+* Now do a lighter coverage of Raw Sienna. Not quite a drybrush, but make sure the paintbrush is not particularly full of paint.
+
+[Honey Brown](2017-04-12_09.23.03.jpg)
+* Now drybrush with Honey brown. This is intended to be a highlight, so you want to focus on it ending up on the upturned edges of the piece. I do this by only moving the brush down against the part.
+
+[Fawn](2017-04-12_09.30.36.jpg)
+* (Optional) Now use fawn to pick out about 5 blocks per piece. Drybrush the fawn on and onto the same brick on the reverse side. Pick different bricks for each of the 4 parts.
+
+[Sepia Wash](2017-04-12_09.42.23.jpg)
+* (Optional) Now use a sepia wash and pick out 5 more bricks. Cover the whole brick with the wash on front and back. This is called glazing. We are using the wash to tint the entire brick.
+
+[Brown Wash](2017-04-12_09.48.39.jpg)
+* (Optional) Finally glaze 5 more random bricks with a brown wash. Brown and sepia are similar, but the hue is still different, and the bricks will give some variation.
+
+[Highlight](2017-04-12_09.59.49.jpg)
+* (Optional) Highlight the stone embelishments (the arches, pillars and base of the niche) with a mix of Desert Sand and Honey Brown
+
+[Grate: Black Wash](2017-04-12_09.50.17.jpg)
+* Use a black wash inside the grate at the bottom
+
+[Grate: Dark Metallic](2017-04-12_09.52.44.jpg)
+* Use a very dark metallic on the grate itself. I used Adamantium Black.
+
+[Grate: Dark Metallic](2017-04-12_09.54.31.jpg)
+* Highlight the grate with a lighter metallic. I chose to also go for a more dull color in Aged Pewter to show the age.
+
+[Embellishments: Bronze](2017-04-12_10.14.13.jpg)
+* Paint the tracery on the top, the rods and the small symbol above the niche with a bronze paint. Here I use Old Bronze.
+
+[Embellishments: Verdigris](2017-04-12_10.21.58.jpg)
+* Mix a green and a blue to create a turquoise. Then add a wash medium and some water. I use equal parts Liquitex Matte Medium and water to make the wash. If you don't have that, you can use water and a little rubbing alcohol to make the wash. The alcohol will make it so the wash also sticks to surfaces instead of just going for the crevices.
+
+[Embellishments: Verdigris Highlights](2017-04-12_10.26.54.jpg)
+* I took my green which was already close to a turquoise and dry brushed the raised surfaces to get more verdegris on the metal.
+
+[Door: Prime](2017-04-12_16.57.17.jpg)
+* Paint the door and door arch (glue 2 back to back) with the krylon flat dark brown
+
+[Door: Burnt Umber](2017-04-12_17.00.32.jpg)
+* Hit the wood on the door with Burnt Umber
+
+[Door: Milk Chocolate](2017-04-12_17.02.14.jpg)
+* Do a lighter layer with Milk Chocolate. I'm keeping the browns a different hue from the stone to make it clear that this is wood.
+
+[Door: Dry Brush](2017-04-12_17.04.24.jpg)
+* Dry brush with Honey Brown
+
+[Door: Metal](2017-04-12_17.08.08.jpg)
+* I used the Aged Pewter on all the metal parts and on the two sides.
+
+[Door: Black Lining](2017-04-12_17.10.20.jpg)
+* Then lined around the metal parts with a black wash.
+
+[Door Arch](2017-04-12_17.14.04.jpg)
+* Paint the arch and the top of the door like the rest of the stonework.
+
+## Construction
+
+[Construction: Walls](2017-04-12_10.29.49.jpg)
+* Glue some short lengths of filament into two of the walls. A pin vice can be useful in this step if the holes are not well cleared.
+
+[Construction: Walls](2017-04-12_10.32.14.jpg)
+* Glue two sides together, making sure that the filament sides are oriented so you can glue the two halves together. The filament acts as a strengthener to keep the bond between sides strong.
+
+[Construction: Walls](2017-04-12_10.33.55.jpg)
+* Glue the two halves together and clamp.
+
+[Construction: Floors](2017-04-12_10.48.43.jpg)
+* If using the floors, glue them into two halves and wait to dry.
+
+[Construction: Floors](2017-04-12_10.50.51.jpg)
+* Then glue the two sides together.
+
+[Construction: Pillars](2017-04-12_15.43.35.jpg)
+* Flip over and glue the pillars in the corners. The pillars are painted the same way as the rest.
+
+[Construction: Awning](2017-04-12_15.48.59.jpg)
+* Glue the painted roof and arches to the building, but *not* the pillars. There's an outline on the building of where these two pieces should be glued. I found it works out better if you glue the arches first and then the roof.
+
+[Construction: Door Assembly](2017-04-12_17.15.35.jpg)
+* Slide the decorative arch in, then the door. Don't glue, this is made to be able to hold windows (like 3 sides of the real mausoleum) or a wall. Both of which I plan on releasing later.
+
+[Final Product](2017-04-14_17.57.18.jpg)
+* Final Product
+

sets/README.md

@@ -39,6 +39,7 @@ For the most part, I use [Americana Craft Paint](https://decoart.com/americana/)
 * [Gloss varnish](http://amzn.to/2Ew6nHu) for things like water, metal, etc.
 * [Matte varnish](http://amzn.to/2BjbusS) for everything else
 * Various metallics from a variety of craft paint lines for metals.
+* [Liquitex Matte Medium](http://amzn.to/2CiHOZq) for making washes or glazes.
 
 #### Paint Brushes
 You will need paint brushes.  For terrain they don't have to be of high wuality, but expect to toss them from time to time.  Here's a [big set](http://amzn.to/2CjrPdL) that's wholly sufficient.  You will want some wide for dry brushing, and some fine point for detail work.  I tend to use Golden Taklon for synthetic brushes.  You will also want some [paint sponges](http://amzn.to/2EEMa2A).