OpenLOCK Set

To create a basic OpenLOCK set, you will want a selection that lets you build a few small rooms, or a larger, more complex room. To that end, we suggest you start off with the following:

Requires 1-2 1 kg rolls of filament. If you want to make the tiles magnetic, it will also reqire 360 Magnets and some cyanoacrylate glue (superglue).

16 E floors (2x2)
8 floor,curved.2x2 or floor,curved,radial.2r (Renamed from F floors, 2x2, curved) Whether you go radial or not is a matter of taste for curved areas.
2 R floors (2x4)
4 U floors (4x4)
20 A walls
4 BA walls <- Strongly suggest you do this one in triplex even if doing magnetic for everything else
8 curved+concave,wall.2r90° walls (renamed from G walls)
2 IA <- Suggest you do this one in triplex too
4 Q walls
4 A doors
2 BA doors
2 G doors
2 Q doors
2 A windows

If doing low walls, print these columns:

4 I low columns
8 O low columns

If doing normal height walls, print these columns:

4 I columns
8 L columns (used for corners)
4 O columns
4 X columns
4 T columns

When picking what you want to print, you are going to first want to decide if you are going to glue pieces or not. If you don't want to glue anything, select the files named [set]_wall.inch.[letter].low.triplex.?. If you want magnets, then select [set]_wall.inch.[letter].low.openforge.?. It is not critical that every wall be the same. The rules for floors are similar. Triplex tiles print as one piece, openforge tiles print as two, and require a glued base.

If you are using the openforge varients, you will also need to print a base: [set]_base.inch.[letter].openlock.magnetic.?.

Second you will want to decide if you want sidelocking. Odds are you do. For that, select files with .side. in the name.

Finally you will want to choose if you want pegs. Pegs are used for indexing a second floor. If you never plan on building multi floor layouts, skip them. Even if you do, you may not want them on all tiles, as they can interfere with the aesthetics a little. We print them on about half of our A walls, which gives enough to index an upper layer if you want.

Cut-Stone

There is not currently a 7.2 openlock set, but there is a 6.0 openlock set, as well as a 4.3 set, that has a subset of what we want. A full 7.2 port is forthcoming.

Walls and Floors A, BA, E, columns
Floors U, many secondary floors. No triplex. No openforge.
Walls A, BA, IA, Q, many secondary walls. No triplex. No openforge.
Curved Walls G, many secondary walls. No openforge.
Curved Floors F, many secondary floors. No triplex. No openforge.
Doors A, Q and many other secondary walls. No triplex. No openforge.
Windows (not yet published)

Cut-Stone Half-Height

There is not currently a 7.2 openlock set, but there is a 6.0 openlock set, as well as a 4.3 set, that has a subset of what we want. A full 7.2 port is forthcoming.

Walls and Floors Includes half height A, BA, E, columns.
Floors U, many secondary floors. No triplex. No openforge.
Walls, A, BA, IA, Q, many secondary walls. No triplex. No openforge.
Curved Walls G, many secondary walls. No openforge.
Curved Floors F, many secondary floors. No triplex. No openforge.
Doors A, Q and many other secondary walls. No triplex. No openforge. Doors are full height.
Windows (not yet published)

Dungeon Stone

Dungeon stone is the first set that offers magnets in the walls as an option. Every file published under Dungeon Stone has an option of printing the file as .triplex or .openforge. If you print the .openforge files, they will be 6mm shorter, and can take an appropriate base that is included in their set.

Primary Walls (A, BA, G, IA, Q, columns)
Primary Floors (AS, E, EA, F, I, R, S, SA, SB, U)
Primary Doors (A, BA, G, Gx, Q)
Windows (A, BA, G, Gx, Q)

Other:

Curved Interface (floors and walls that match the outside of G walls to join a round room to a square one)

Dungeon Stone Half-Height

Low Primary Walls (A, BA, G, IA, Q, columns)
Floors (E, F, U)
Doors (A, BA, G, Gx, Q) (Not Low)
Windows (A, BA, G, Gx, Q) (Not Low)

Other:

Curved Interface (floors and walls that match the outside of G walls to join a round room to a square one)

Rough/Ruined Stone

There is not currently a 7.2 openlock set, but there is a 6.0 openlock set, that has a subset of what we want. A full 7.2 port is forthcoming.

Sidelock Walls A, columns, multiple heights and states of ruin. No triplex. No openforge.
Walls A, BA, Q, multiple heights and many secondary walls. No triplex. No openforge.
Shattered floors E in various broken forms, needs to be resized by 101.6% as they are in 25mm. No single piece options, all require use of a base.
Floors E, U and every other floor size from 1x1 - 4x4. Needs to be resized by 101.6% as they are in 25mm. No single piece options, all require use of a base.
Doors (not yet published)
Windows (not yet published)

Tudor

Tudor set is not yet published, though start2 has published a number of tudor ports for me.

Instructions

6.4 KiB Raw Permalink Blame History