public/openforge-tutorials
1
0
Fork 0
mirror of https://github.com/devonjones/openforge-tutorials/ synced 2025-12-13 09:46:28 +00:00
Code Issues Releases Wiki Activity
Files
a5c25278f6a45806a3b123a4eacb33ed274f4b78
openforge-tutorials/sets/README.md
Devon Jones a5c25278f6 Update README.md
2017-09-12 21:21:38 -06:00

174 lines
7.2 KiB
Markdown
Raw Blame History

# OpenForge Sets
## Introduction
## Basic Set
To create a basic set, you will want a selection that lets you build a few small rooms, or a larger, more complex room. To that end, we suggest you start off with the following:
* 14 2x2 walls
* 8 2x2 corners
* 12 2x2 floors
* 2 4x4 floors
* 4 2x2 doors
* 2 4x2 wide doors
* 2 2x2 windows
### Cut-Stone
* [Walls](https://www.thingiverse.com/thing:1419276)
* [Corners](https://www.thingiverse.com/thing:1434550)
* [Floors](https://www.thingiverse.com/thing:1422779)
* [Arched Doors](https://www.thingiverse.com/thing:1440089) or [Wood Frame Doors](https://www.thingiverse.com/thing:1722459) (consider doing a full set of both)
* [Arched Windows](https://www.thingiverse.com/thing:1541301) or [Square Windows](https://www.thingiverse.com/thing:1674376) (consider doing a full set of both)
### Cut-Stone Half-Height
* [Walls](https://www.thingiverse.com/thing:1591395)
* [Corners](https://www.thingiverse.com/thing:1598304)
* [Floors](https://www.thingiverse.com/thing:1422779) (Same as Cut-Stone floors above)
Windows and Doors don't make much sense at half-height. If your goal is to create a set that lets you easily see the miniatures, we suggest printing the half-height set and then printing full height doors and windows above.
### Tudor
* [Walls](https://www.thingiverse.com/thing:1598377), [Wall Variations Set 1](https://www.thingiverse.com/thing:1598386), [Wall Variations Set 2](https://www.thingiverse.com/thing:1618353), [Wall Construction Kit Parts](https://www.thingiverse.com/thing:1641003), [Wall Construction Kit Floors](https://www.thingiverse.com/thing:1640999)
* [Corners](https://www.thingiverse.com/thing:1635716), [Corner Variations Set 1](https://www.thingiverse.com/thing:1635721) [Corner Construction Kit Parts](https://www.thingiverse.com/thing:1727412), [Corner Construction Kit Floors](https://www.thingiverse.com/thing:1727367)
* [Floors](https://www.thingiverse.com/thing:1585586)
* [Wood Frame Doors](https://www.thingiverse.com/thing:1649422), [Wood Frame Door Variations Set 1](https://www.thingiverse.com/thing:1649437)
* [Square Windows](https://www.thingiverse.com/thing:1659308)
### Rough Stone
Rough stone is a varation of ruined stone, where the pieces are complete. If you print rough stone, we suggest also printing the full range of ruined variations, as the two work really well together to make partially intact buildings or rooms.
* [Walls](https://www.thingiverse.com/thing:2275577)
* Suggested Prints
* 14 of ruined_wall.wall.ckit.2x.full.stl
* If you want half-height, instead ruined_wall.wall.ckit.2x.half.stl
* 2 each of broken_stone_floor.wall.ckit.2x2.a - broken_stone_floor.wall.ckit.2x2.i
* [Corners](https://www.thingiverse.com/thing:2328221)
* Suggested Prints
* 8 ruined_wall.corner.ckit.2x.full.stl or 8 of ruined_wall.corner.ckit.2x.half.stl if you want half height
* 8 of broken_stone_floor.corner.ckit.2x2.a - broken_stone_floor.corner.ckit.2x2.i
* [Floors](https://www.thingiverse.com/thing:2244962)
* Suggested prints
* 2x each of 2x2.a - 2x2.i (18 total, but gives a lot of variation)
* 2x of 4x4
* [Wood Framed Doors](https://www.thingiverse.com/thing:2423018)
* Suggested prints
* 4x of ruined_door_square.ckit.2x.full-full
* 4x of ruined_floor.door.ckit.2x2.stl
* 4x of door_lintel_1, 2 or 3
* 4x of tudor_square_door
* 2x of ruined_door_square.ckit.4x.full-fullx
* 2x of ruined_floor.door.ckit.4x2.stl
* 2x of door_lintel_1.double, 2 or 3
* 4x of tudor_square_door_double
* [Square Windows](https://www.thingiverse.com/thing:2503963)
* Suggested prints
* 2x ruined_wall.window.ckit.2x.full
* Use 2 of the floors printed for the walls that were left over
### Ruined Stone
Ruined stone is a varation of rough stone, where the pieces are not entirely complete. If you print rough stone, we suggest also printing the full range of ruined variations, as the two work really well together to make partially intact buildings or rooms.
* [Walls](https://www.thingiverse.com/thing:2275577)
* Suggested Prints
* 2x ruined_wall.wall.ckit.2x.full.stl
* 2x ruined_wall.wall.ckit.2x.full-half.stl
* 2x ruined_wall.wall.ckit.2x.full-low.stl
* 2x ruined_wall.wall.ckit.2x.half-full.stl
* 2x ruined_wall.wall.ckit.2x.half-low.stl
* 2x ruined_wall.wall.ckit.2x.low-full.stl
* 2x ruined_wall.wall.ckit.2x.low-half.stl
* 2x ruined_wall.wall.ckit.2x.low.stl
* 2x each of broken_stone_floor.wall.ckit.2x2.a - broken_stone_floor.wall.ckit.2x2.i
* [Corners](https://www.thingiverse.com/thing:2328221)
* Suggested Prints
* There are 27 variations of corner height, pick 8 that are uneven
* 8 of broken_stone_floor.corner.ckit.2x2.a - broken_stone_floor.corner.ckit.2x2.i
* [Floors](https://www.thingiverse.com/thing:2244962)
* Suggested prints
* 2x each of 2x2.a - 2x2.i (18 total, but gives a lot of variation)
* 2x of 4x4
* [Wood Framed Doors](https://www.thingiverse.com/thing:2423018)
* Suggested prints
* 4x of ruined_door_square.ckit.2x.full-half, full-low, half-full, half-half, half-low, low-full, low-half, low-low
* 4x of ruined_floor.door.ckit.2x2.stl
* 2x of ruined_door_square.ckit.4x.full-half, full-low, half-full, half-half, half-low, low-full, low-half, low-low
* 2x of ruined_floor.door.ckit.4x2.stl
* [Square Windows](https://www.thingiverse.com/thing:2503963)
* Suggested prints
* Any 2 of ruined_wall.window.ckit.2x.full-half, half and half-full
* Use 2 of the floors printed for the walls that were left over
## Diagonal Set
* 8 2x2 Diagonals (Diagonal floor)
* 8 2x2 Diagonals (Square floor)
### Cut-Stone
* [Diagonal](https://www.thingiverse.com/thing:1450949)
## Cut-Stone Half-Height
* [Diagonal](https://www.thingiverse.com/thing:2428086) (Not our tile, but works)
* [Diagonal Square Bases](https://www.thingiverse.com/thing:2314886) (Also not our tiles, but they work)
### Tudor
* [Diagonal](https://www.thingiverse.com/thing:1669833)
* [Diagonal Square Bases](https://www.thingiverse.com/thing:1669832)
### Rough Stone
### Ruined Stone
## Curved Set
* 8 2x2 Curved (Curved floor)
* 8 2x2 Curved (Square floor)
* 4 4x4 Curved (Curved floor)
* 2 2x4 Curved (Curved floor)
* 2 4x2 Curved (Curved floor)
### Cut-Stone
* [Curved](https://www.thingiverse.com/thing:1456837)
* [Curved Square Base](https://www.thingiverse.com/thing:1456863)
### Cut-Stone Half-Height
* [2x2 Curved Square](https://www.thingiverse.com/thing:2314886) (Not our tiles, but they work)
* 2x2, 2x4, 4x2, 4x4 Curved Half-Height - No known implementation
If you are interested in the missing tiles happening, [Patrons](https://www.patreon.com/masterworktools) can [vote](http://openforge.masterwork-tools.com/) on new tiles.
### Tudor
We've been unable to find examples of curved walls in a Tudor style, so we've never implemented sets for this. If you are interested in these happening, [Patrons](https://www.patreon.com/masterworktools) can [vote](http://openforge.masterwork-tools.com/) on new tiles.
### Rough Stone
### Ruined Stone
## Hallway Set
* 16 A OpenLOCK Walls, sidelock + magnetic + OpenLOCK bases
* 8 BA OpenLOCK Walls, sidelock + OpenLOCK Triplex bases
* 16 L OpenLOCK Columns, sidelock
### Cut-Stone
### Tudor
### Rough Stone
### Ruined Stone
## Options
* 4 2x2 Arrow Slits
* 2 2x2 Grate
* 1 2x4 Grate
* 1 4x4 Grate
* 1 2x2 Trap Door
* 1 2x2 Corner Trap Door
* Mosaic Floors
Reference in New Issue View Git Blame Copy Permalink